Search results for 'coiler locks'

  • Mini - Penthouse*

    Mini - Penthouse*

      The “Mini-Penthouse” is ideally suited for pulling material from reel racks, reel roller platforms or a pay-out cart. Also, ideal for use with an extrusion line when equipped with a dancer or tension control....

    Out of stock

  • Mini - Penthouse

    Mini - Penthouse

      The “Mini-Penthouse” is ideally suited for pulling material from reel racks, reel roller platforms or a pay-out cart. Also, ideal for use with an extrusion line when equipped with a dancer or tension control....

    Out of stock

  • MRTU: Cantilevered Shaft Reeling & Coiling Take-Up M/C

    MRTU: Cantilevered Shaft Reeling & Coiling Take-Up M/C

      Reelpowerwc MRTU Cantilevered Shaft Reeling and Coiling Take Up M/C is well known for its high utility and it comes with hassle free operations, durability and sturdy construction....

    Out of stock

  • Side Plate Coiler

    Side Plate Coiler

      Reelpower Industrial manufactured side plate coiler is outstanding product which features tie off slots, quick release outer flange, tapered inner diameter....

    Out of stock

  •  Automatic Rewind Coiler

    Automatic Rewind Coiler

      Automatic Rewind Coiler comes out with higher coil production at lower cost, greater production flexibility and increase extrusion speed up to 100% and reduce labor cost up to 75%....

    Out of stock

  • Automatic Cut and Transfer ACT-16

    Automatic Cut and Transfer ACT-16

      The ACT System is highly flexible and reliable applicable to multiple products and applications. Now operating on and offline wire and cable, medical tubing andplastic profile on applications....

    Out of stock

  • Special  Heavy Duty Coiler

    Special Heavy Duty Coiler

      Special heavy duty coiler comes with wide range coiler width varying from 4-30.It is hand operated with crank ID varyiung from 26-31. It is used for synchronizing in line applications....

    Out of stock

  • Semiautomatic Coilers

    Semiautomatic Coilers

      Semiautomatic coilers are a low cost alternative to fully automatic equipment. These coilers wind the product as it emerges from the extrusion line automatically following extrusion speed using dancer arm or torque control, and they automatically layer the pipe into the desired coil shape....

    Out of stock

  • Semiautomatic Pipe Coiler

    Semiautomatic Pipe Coiler

      Semiautomatic coilers are a low cost alternative to fully automatic equipment. These coilers wind the product as it emerges from the extrusion line automatically following extrusion speed using dancer arm or torque control, and they automatically layer the pipe into the desired coil shape....

    Out of stock

  • Automatic Cut & Transfer ACT-26

    Automatic Cut & Transfer ACT-26

      The Automatic Cut and Transfer System, automatic spool is highly flexible and reliable applicable to multiple products and applications. The Automatic Cut and Transfer System offers fast return of investment when replacing manual machines with improved safety and one operator to operate multiple lines....

    Out of stock

  • Special Coiling & Spooling Equipment

    Special Coiling & Spooling Equipment

      Coilers have been built for tube coils weighing just ounces to rod and metal strip coils weighing 5,000 lbs. They are also built for offline rewind and continuous process applications...

    Out of stock

  • HD Reel Roller Platform – 480 DW HD*

    HD Reel Roller Platform – 480 DW HD*

      Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel.Rugged Steel “Angle” Construction with Steel Plate Ramp....

    Out of stock

  • Pipe,Hose,Tube Coilers and Handling Equipment

    Pipe,Hose,Tube Coilers and Handling Equipment

      A wide range of coiling equipment is available for winding material onto reels/ spools or onto coils (stretch wrapped or banded). Both on and off-line coilers are available for material ranging in size from .25” (6.35 mm) to 10” (254 mm). ReelPower Industrial offers both standard and custom machinery for coiling applications. Material handling solutions for up...

    Out of stock

  • Light Duty Economy Coiler - LDEC*

    Light Duty Economy Coiler - LDEC*

      Coiler Options: 3/8 C - Coiler 3.5” Wide X 8” I.D. X 14” O.D. 3/12 C - Coiler 3.5” Wide X 12” I.D. X 21” O.D. 3/16 C - Coiler 3.5” Wide X 16” I.D. X 27.5” O.D....

    Out of stock

  • Dual Head Spoolers & Coilers

    Dual Head Spoolers & Coilers

      The DHSC is a complete dual head spooler/coiler designed for continuous production. When one spool is running the operator can be unloading the full spool and loading an empty spool to make ready for the change over....

    Out of stock

  • Mobile Measurers & Coilers

    Mobile Measurers & Coilers

      The mobile measuring and coiling systems are ideally suited for coiling (or spooling) material from source reels mounted on a reel rack, roller platform or payout cart....

    Out of stock

  • Manual Collapsible Coilers-Light Duty Coilers

    Manual Collapsible Coilers-Light Duty Coilers

      Light Duty Coilers Manual Hand Crank Collapsible coils Shown is Model 3/8c Collapsible Coiler Table-Top Stand Included Standard Models Available • 3/8c- 8” ID x 14” OD x 31/2” wide • 3/12c- 12” ID x 21” OD x 31/2” wide • 3/16c- 16” ID x 271/2” OD x 31/2” wide Coiler fully collapsible for easy coil removal...

    Out of stock

  • Heavy Duty Economy Coiler (HDEC)

    Heavy Duty Economy Coiler (HDEC)

      Coiler Options:3/8 C - Coiler 3.5” Wide X 8” I.D. X 14” O.D.3/12 C - Coiler 3.5” Wide X 12” I.D. X 21” O.D.3/16 C - Coiler 3.5” Wide X 16” I.D. X 27.5” O.D....

    Out of stock

  • Hose Reel P/N 14000-42*

    Hose Reel P/N 14000-42*

      P/N 14000-42 Our hose reel is designed for lighter weight material such as "tubing, hose and nylon cord or rope". The Manual hand crank is designed for easy winding and is accompanied with stand for mounting on any style of work station...

    Out of stock

  • Reel Roller Platform – RRP – 360

    Reel Roller Platform – RRP – 360

      Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel. Rugged Steel “Angle” Construction with Steel Plate Ramp....

    Out of stock

  • Reel Roller Platform – RRP – 280

    Reel Roller Platform – RRP – 280

      Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel. Rugged Steel “Angle” Construction with Steel Plate Ramp....

    Out of stock

  • Reel Roller Platform – RRP - 300

    Reel Roller Platform – RRP - 300

      Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal.Side Rollers are Included. Low Base Design to Avoid Damaging of Cable  Inside Reel. Rugged Steel “Angle” Construction with Steel Plate Ramp....

    Out of stock

  • Reel Roller Platform - RRP 600

    Reel Roller Platform - RRP 600

      Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel. Rugged Steel “Angle” Construction with Steel Plate Ramp....

    Out of stock

  • HD Reel Roller Platform – 480 DW HD

    HD Reel Roller Platform – 480 DW HD

      Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel.Rugged Steel “Angle” Construction with Steel Plate Ramp....

    Out of stock

  • High Speed Spooler and Coiler

    High Speed Spooler and Coiler

      Standard Features Capacity 24” diameter x 12” wide x 150 LBs Dynamic Braking Feature V-Belt Drive Remote Safety Foot Switch Speed Control Potentiometer Illuminated on/off power switch 3/8 Inch Drive Pin 3/4 diameter Plug in Shaft standard with quick lock collar Right or left hand configuration available...

    Out of stock

  • 2 - Comp. Reel 40"/48" x 16" x 6"

    2 - Comp. Reel 40"/48" x 16" x 6"

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • 1 - Comp. Reel 40"/48" x 16" x 8"

    1 - Comp. Reel 40"/48" x 16" x 8"

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solidsteel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reelweight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • HJ 2 SS / Galvanized

    HJ 2 SS / Galvanized

      Integral Hydraulic Push Button Cutter Manual Shaftless Feature Electronic Stop to Length Counter Paralleling Guide Box Safety Guards Collapsible Coiler (Steel or Aluminum) Powered Traverse Systems Measuring Meter Paralleling Reels...

    Out of stock

  • HJ/K 3 SS / Galvanized

    HJ/K 3 SS / Galvanized

      Integral Hydraulic Push Button Cutter Manual Shaftless Feature Electronic Stop to Length Counter Paralleling Guide Box Safety Guards Collapsible Coiler (Steel or Aluminum) Powered Traverse Systems Measuring Meter Paralleling Reels...

    Out of stock

  • WKP Series: Heavy Duty Mobile Payout

    WKP Series: Heavy Duty Mobile Payout

      Portable WKP Pay-out Machine has a heavy duty structural steel mobile frame design which comes standard with casters and floor locks for ease of maneuverability and stability during operation.Utilization of a Hydraulic Jack allows reel to be raised and lowered with ease,eliminating the need to “tilt” and ergonomic strain (back-strain) problems....

    Out of stock

  • CRS/RPR “COMBO”

    CRS/RPR “COMBO”

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2” diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs....

    Out of stock

  • NK Series: Take-Up Reeling Machine and Coiling Machine

    NK Series: Take-Up Reeling Machine and Coiling Machine

      NK Series: Take-Up Reeling Machine and Coiling Machine comes with powered hydraulic control to raise and lower the reel automatically....

    Out of stock

  • 3 - Combo Reel & Stand

    3 - Combo Reel & Stand

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • 3 - Comp. Reel 40"/48" x16" x 24"

    3 - Comp. Reel 40"/48" x16" x 24"

      The Reelpower WC Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • 5 - Comp. Reel 40"/48" x 16" x 32"

    5 - Comp. Reel 40"/48" x 16" x 32"

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • 5 - Combo Reel & Stand

    5 - Combo Reel & Stand

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • 4/1 Combo 4- Way Lift With Wheels

    4/1 Combo 4- Way Lift With Wheels

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • Cable Reel Stand With Adaptor

    Cable Reel Stand With Adaptor

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • 4/1 - Combo Reel & Stand

    4/1 - Combo Reel & Stand

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • Reel Roller Platform - RRP 600*

    Reel Roller Platform - RRP 600*

      Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel. Rugged Steel “Angle” Construction with Steel Plate Ramp....

    Out of stock

  • Reel Roller Platform – RRP - 300*

    Reel Roller Platform – RRP - 300*

      Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal.Side Rollers are Included. Low Base Design to Avoid Damaging of Cable  Inside Reel. Rugged Steel “Angle” Construction with Steel Plate Ramp....

    Out of stock

  • 4 - Comp. Reel 40"/48" x 16" x 32"

    4 - Comp. Reel 40"/48" x 16" x 32"

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site...

    Out of stock

  • Reel Roller Platform – RRP – 280*

    Reel Roller Platform – RRP – 280*

      Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel. Rugged Steel “Angle” Construction with Steel Plate Ramp....

    Out of stock

  • 4 - Comp. Reel 40"/48" x 16" x 26"

    4 - Comp. Reel 40"/48" x 16" x 26"

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • 4 - Combo Reel & Stand

    4 - Combo Reel & Stand

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • 3/1- Combo Reel & Stand

    3/1- Combo Reel & Stand

      The Reelpower WC Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site.  ...

    Out of stock

  • 3 - Comp. Reel 40"/48" x32" x 16"

    3 - Comp. Reel 40"/48" x32" x 16"

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • 6 - Combo Reel & Stand

    6 - Combo Reel & Stand

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • Heavy Duty Penthouse*

    Heavy Duty Penthouse*

      Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: 36” Diameter CT Coil Turntable with Adjustable ID Pins for Coil Payo and Center Post for Spool Payo...

    Out of stock

  • Maxi Penthouse*

    Maxi Penthouse*

      Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for Stability...

    Out of stock

  • Collapsible Coilers - Standard & Custom Sizes

    Collapsible Coilers - Standard & Custom Sizes

      Available in either Aluminum or Steel, Collapsible Coilers are crafted to be used with our shafted and shaft-less machinery. They are easily connected and removed, saving many manhours of labor. these coilers are available in several standard size....

    Out of stock

  • High Speed Spoolers & Coilers

    High Speed Spoolers & Coilers

      These units are offered in a variety of capacities for spooling or coiling wire, cable and other flexible materials....

    Out of stock

  • TUC5

    TUC5

      ReelPower Industrial Special Model TUC5 is capable of supporting reels up to 60" O.D. X 48" wide x 5,000 lbs. Includes Multi Level Shaft Supports for various diameter reels, Integral tilting, Reel Carriage for loading and unloading and is available floor mounted with bolt down flanges.  ...

    Out of stock

  • Cabling Systems

    Cabling Systems

      The entire cabling line is PC controlled allowing for individual cable recipe retrieval precisely controlling the cabling bay(s) speeds and Caterpuller Capstan speeds producing exacting lay lengths per cable specification....

    Out of stock

  • Heavy Duty Penthouse

    Heavy Duty Penthouse

      Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: 36” Diameter CT Coil Turntable with Adjustable ID Pins for Coil Payo and Center Post for Spool Payo...

    Out of stock

  • CTU/CPO

    CTU/CPO

      Traversing column style take-ups and payoffs are some of the most advanced on the market today and offer capacities to 80,000 pounds. These units offer unique benefits as true walk thru capabilities, overhead reel loading or loading from the front or rear of the unit....

    Out of stock

  • Maxi Penthouse

    Maxi Penthouse

      Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for Stability...

    Out of stock