Search results for 'reel automatically'

  • Mini - Penthouse*

    Mini - Penthouse*

      The “Mini-Penthouse” is ideally suited for pulling material from reel racks, reel roller platforms or a pay-out cart. Also, ideal for use with an extrusion line when equipped with a dancer or tension control....

    Out of stock

  • HJP

    HJP

      Recommended for use with paying out material from supply reels. The HJP can improve the efficiency of your reel and cable handling operation. By utilizing a hydraulic jack (standard) or ElectroLift, reels can be raised and lowered with ease, using minimal manpower....

    Out of stock

  • NK Series: Take-Up Reeling Machine and Coiling Machine

    NK Series: Take-Up Reeling Machine and Coiling Machine

      NK Series: Take-Up Reeling Machine and Coiling Machine comes with powered hydraulic control to raise and lower the reel automatically....

    Out of stock

  • WKT3 Coiling and Spooling Take Up

    WKT3 Coiling and Spooling Take Up

      The WKT Series Spooling and Coiling equipment is perfect for light to moderate duty applications.Take-ups are standard with a 1 3/8” O.D. shaft with bushings for 2”, 2 1/2” and 3” arbor holes.Utilization of a Hydraulic Jack allows reel to be raised and lowered with ease,eliminating the need to “tilt” and ergonomic strain (back-strain) problems....

    Out of stock

  • WKP Series: Heavy Duty Mobile Payout

    WKP Series: Heavy Duty Mobile Payout

      Portable WKP Pay-out Machine has a heavy duty structural steel mobile frame design which comes standard with casters and floor locks for ease of maneuverability and stability during operation.Utilization of a Hydraulic Jack allows reel to be raised and lowered with ease,eliminating the need to “tilt” and ergonomic strain (back-strain) problems....

    Out of stock

  • HJ/K Series: Mobile Reeling & Coiling Machine

    HJ/K Series: Mobile Reeling & Coiling Machine

      HJ/K series mobile reeling and coiling machine is a practical and economical solution for large diameter spooling and coiling applications. The HJ/K can improve the efficiency of your reel and cable handling operation. By utilizing a hydraulic jack (standard), slide drive (optional), 1700 measurer and HD mechanical drive, reels and material may be handled with ease, using minimum manpower....

    Out of stock

  • Cable Reel Stands

    Cable Reel Stands

      Reelpower Industrial Heavy Duty Cable Reel Stands are designed to last, featuring a forklift base to move them around with. Reelpower WC offers a complete line of standard, custom, and powered Cable Reel Stands to meet all your reeling needs....

    Out of stock

  • RT-10 The Reel Thing*

    RT-10 The Reel Thing*

      Allows you to lift and flip your reel over from a rolling to a non-rolling position. The Reel Thing has been laboratory tested with ASME code stamped on each toggle bar making it safer to operate. It allows you even more lift with higher load ratings, and it offers you versatility & safety while transporting your reels and paying out product in the field. It is offered in a variety of sizes,...

    Out of stock

  • TRD-HD - The Reel Deal

    TRD-HD - The Reel Deal

      Reelpower Industrial Heavy Duty TRD – “The Reel Deal” is a reel lifter, flipper, and pay-out tool for the field. It is a heavy Duty tool used to move reels in the yard or in the field, allowing you to flip reels from a rolling position onto their side, as well as lift the reel off the ground to pay-out from. The TRD helps you improve your overall production while reducing your business...

    Out of stock

  • Reel Power Ind HJ/CVS: Mobile Reel-To-Coil Machine

    Reel Power Ind HJ/CVS: Mobile Reel-To-Coil Machine

      Standard Specifications 1 HP SCR Variable Speed Drive, 0-70 RPM Pay-out capacity 20” to 48” dia. x 36” wide x 2,500 lbs. ROM 1700 Measurer - 1/8” to 2” dia. capacity 1 3/8” dia. Reel Shaft Bushings for 2”, 2 1/2” and 3” arbor holes Heavy Duty Swivel Casters (rear) 10” Front Wheels Model 5C or 7C Collapsible Coilers Floor Locks Tool Tray ...

    Out of stock

  • Fine Wire Respooler

    Fine Wire Respooler

      When high speed, versatility, ease of use and simplicity are important, the FWR-101 is the answer....

    Out of stock

  • Mobile Reel Rack Cart(REELRACK-61)*

    Mobile Reel Rack Cart(REELRACK-61)*

      Mobile Reel Rack Cart(REELRACK-61) : Reelpower Industrial “Mobile” Reel Rack Cart is manufactured with 3” Structural Steel to withstand many years of use. Components include upright frames, crossbeams, front-frame hanging brackets, solid steel reel axles, two fixed wheels, two rotating casters with brakes, push handles (for steering) and a galvanized-steel lower shelf pan for...

    Out of stock

  • RRP: Reel Roller Platforms

    RRP: Reel Roller Platforms

      Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are included. Low Base Design to Avoid Damaging of Cable Inside Reel. Rugged Steel :Angle" Construction with Steel Plate Ramp....

    Out of stock

  • Reel Jacks – Cable Drum Jacks

    Reel Jacks – Cable Drum Jacks

      "L" Series Cable Drum Jacks : These Hydraulic Cable Drum Jacks are indispensable for a properly equipped cable depot. Adjustable Shaft Saddle: Shaft saddles may be set for a number of vertical positions so that a minimum of foot pedal “jacking” is required....

    Out of stock

  • Reel Jacks  - Simplex Mechanical Jacks

    Reel Jacks - Simplex Mechanical Jacks

      Reel Jacks - Simplex Mechanical Jacks: Reelpower Industrial Heavy Duty Simplex Jacks are designed with rugged use in mind. Exclusively distributed by Reelpower Industrial, these ratchet designed jacks are safe, strong, and easy to use when lifting reels....

    Out of stock

  • Powered Cable Reel Stand

    Powered Cable Reel Stand

      Shown Below is our Model SP-CRS108 Powered Cable Reel Stand for reels 108"Dia x 80" wide x 25,000lbs load capacity. This machine was designed for retracting cords in a Marine Application. It is equipped with a 15,000 Volt Slip Ring Assembly, Self Contained Diesel Engine Powered Unit. It also has a Tension Controlled Drive System. INCLUDES: Heavy duty structural steel frame with lifting eyes...

    Out of stock

  • PRR Series: Powered Reel Roller

    PRR Series: Powered Reel Roller

      Reelpower Industrial PRR Series was created for use in extrusion, assembly and inspection processes or where minimum floor space usage is required. The PRR may be easily loaded by utilizing the loading ramp, overhead crane, or with a forklift and is available with options to fit your application....

    Out of stock

  • Re-Reever / Tensioner Trailer – RRT

    Re-Reever / Tensioner Trailer – RRT

      Trailer Mounted Re-Reeving Machinery from 5000lb to 100,000lb capacities. Designed and manufactured for your wire rope applications.  ...

    Out of stock

  • Front Hanging

    Front Hanging

      The Front Frame Hanging Package for Lighter Duty Master/Supply Reels for a more economical method of being able to pull material from several lighter duty reels....

    Out of stock

  • Track & Trolley Cable Reel System

    Track & Trolley Cable Reel System

      ReelPower Industrial Track & Trolley Cable Reel System for reel storage and for paralleling operations is built to last. ReelPower Industria is committed to improving your overall operating profitability while reducing your overall business risk!...

    Out of stock

  • SD Track & trolley

    SD Track & trolley

      The Standard Duty Track & Trolley Package for Master/Supply Reels is great for doubling upon your reels and providing better efficiency by making the most of your valuable space....

    Out of stock

  • TUC5

    TUC5

      ReelPower Industrial Special Model TUC5 is capable of supporting reels up to 60" O.D. X 48" wide x 5,000 lbs. Includes Multi Level Shaft Supports for various diameter reels, Integral tilting, Reel Carriage for loading and unloading and is available floor mounted with bolt down flanges.  ...

    Out of stock

  • RS Take-Up & Pay-Out Series

    RS Take-Up & Pay-Out Series

      Standard Reel Capacities: TAKE-UP RST3N 30” to 60” dia., 34” wide X 3,000 lbs. RST4N 30” to 60” dia., 36” wide X 4,000 lbs. RST5 36” to 72” dia., 45” wide X 5,000 lbs....

    Out of stock

  • RT-20  The Reel Thing*

    RT-20 The Reel Thing*

      Allows you to lift and flip your reel over from a rolling to a non-rolling position. The Reel Thing has been laboratory tested with ASME code stamped on each toggle bar making it safer to operate. It allows you even more lift with higher load ratings, and it offers you versatility & safety while transporting your reels and paying out product in the field. It is offered in a variety of sizes,...

    Out of stock

  • RT-40  The Reel Thing*

    RT-40 The Reel Thing*

      Allows you to lift and flip your reel over from a rolling to a non-rolling position. The Reel Thing has been laboratory tested with ASME code stamped on each toggle bar making it safer to operate. It allows you even more lift with higher load ratings, and it offers you versatility & safety while transporting your reels and paying out product in the field. It is offered in a variety of sizes,...

    Out of stock

  • RT-60  The Reel Thing*

    RT-60 The Reel Thing*

      Allows you to lift and flip your reel over from a rolling to a non-rolling position. The Reel Thing has been laboratory tested with ASME code stamped on each toggle bar making it safer to operate. It allows you even more lift with higher load ratings, and it offers you versatility & safety while transporting your reels and paying out product in the field. It is offered in a variety of sizes,...

    Out of stock

  • RL-50 REEL TRANSPORTER*

    RL-50 REEL TRANSPORTER*

      Reelpower Industrial Forklift Reel Loader Transports Reels Quicker, Easier and Safer....

    Out of stock

  • RL-100 REEL TRANSPORTER*

    RL-100 REEL TRANSPORTER*

      Reelpower Industrial Forklift Reel Loader Transports Reels Quicker, Easier and Safer....

    Out of stock

  • RL-75 REEL TRANSPORTER*

    RL-75 REEL TRANSPORTER*

      Available in three sizes: RL 75 - for 7,500 LBS Reels...

    Out of stock

  • Reel Lifter 3000LB Capacity*

    Reel Lifter 3000LB Capacity*

      Reelpower Industrial Heavy Duty TRD – “The Reel Deal” is a reel lifter, flipper, and pay-out tool for the field. It is a heavy Duty tool used to move reels in the yard or in the field, allowing you to flip reels from a rolling position onto their side, as well as lift the reel off the ground to pay-out from. The TRD helps you improve your overall production while reducing your...

    Out of stock

  • Reel Lifter 5000LB Capacity*

    Reel Lifter 5000LB Capacity*

      Reelpower Industrial Heavy Duty TRD – “The Reel Deal” is a reel lifter, flipper, and pay-out tool for the field. It is a heavy Duty tool used to move reels in the yard or in the field, allowing you to flip reels from a rolling position onto their side, as well as lift the reel off the ground to pay-out from. The TRD helps you improve your overall production while reducing your...

    Out of stock

  • 1 - Comp. Reel & Adaptor

    1 - Comp. Reel & Adaptor

      Custom Adaptors for existing Combo Units for mounting a single compartment paralleling reel. Includes heavy duty drop-in bracket with fixed 2” dia. stub shaft andreel 2 1/8” locking collars. RPR 15 Single compartment paralleling reel, 40” O.D. x 16” I.D. x 8” wide....

    Out of stock

  • 1 - Comp. Reel & Adaptor

    1 - Comp. Reel & Adaptor

      Custom Adaptors for existing Combo Units for mounting a single compartment paralleling reel. Includes heavy duty drop-in bracket with fixed 2” dia. stub shaft andreel 2 1/8” locking collars. RPR 15 Single compartment paralleling reel, 40” O.D. x 16” I.D. x 8” wide....

    Out of stock

  • 1 - Comp. Reel & Stand & Adaptor

    1 - Comp. Reel & Stand & Adaptor

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • 1 - Comp. Reel 40"/48" x 16" x 8"

    1 - Comp. Reel 40"/48" x 16" x 8"

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solidsteel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reelweight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • 2 - Comp. Reel 40"/48" x 16" x 6"

    2 - Comp. Reel 40"/48" x 16" x 6"

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • 3 - Combo Reel & Stand

    3 - Combo Reel & Stand

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • 3 - Comp. Reel 40"/48" x16" x 24"

    3 - Comp. Reel 40"/48" x16" x 24"

      The Reelpower WC Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • 3 - Comp. Reel 40"/48" x32" x 16"

    3 - Comp. Reel 40"/48" x32" x 16"

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • 3/1- Combo Reel & Stand

    3/1- Combo Reel & Stand

      The Reelpower WC Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site.  ...

    Out of stock

  • 4 - Combo Reel & Stand

    4 - Combo Reel & Stand

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • 4 - Comp. Reel 40"/48" x 16" x 26"

    4 - Comp. Reel 40"/48" x 16" x 26"

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • 4 - Comp. Reel 40"/48" x 16" x 32"

    4 - Comp. Reel 40"/48" x 16" x 32"

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site...

    Out of stock

  • 4/1 - Combo Reel & Stand

    4/1 - Combo Reel & Stand

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • 5 - Combo Reel & Stand

    5 - Combo Reel & Stand

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • 5 - Comp. Reel 40"/48" x 16" x 32"

    5 - Comp. Reel 40"/48" x 16" x 32"

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • 6 - Combo Reel & Stand

    6 - Combo Reel & Stand

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • Powered Cable Reel Stand

    Powered Cable Reel Stand

      Custom Powered Reel Stand with Removable Variable Speed Drive and RPR-45 Parallel Reel....

    Out of stock

  • HD-Powered Cable Reel Stand

    HD-Powered Cable Reel Stand

      Shown Below is our Model SP-CRS108 Powered Cable Reel Stand for reels 108"Dia x 80" wide x 25,000lbs load capacity. This machine was designed for retracting cords in a Marine Application. It is equipped with a 15,000 Volt Slip Ring Assembly, Self Contained Diesel Engine Powered Unit. It also has a Tension Controlled Drive System....

    Out of stock

  • Cable Reel Stand With Adaptor

    Cable Reel Stand With Adaptor

      The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel payout, shaft safety locks with locking pin and a maximum reel weight of 5,000 lbs. Load the reel(s) at your facility and deliver right to the job-site....

    Out of stock

  • Reel Roller Platform - RRP 600*

    Reel Roller Platform - RRP 600*

      Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel. Rugged Steel “Angle” Construction with Steel Plate Ramp....

    Out of stock

  • Reel Roller Platform – RRP - 300*

    Reel Roller Platform – RRP - 300*

      Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal.Side Rollers are Included. Low Base Design to Avoid Damaging of Cable  Inside Reel. Rugged Steel “Angle” Construction with Steel Plate Ramp....

    Out of stock

  • Reel Roller Platform – RRP – 280*

    Reel Roller Platform – RRP – 280*

      Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel. Rugged Steel “Angle” Construction with Steel Plate Ramp....

    Out of stock

  • Reel Roller Platform – RRP – 360*

    Reel Roller Platform – RRP – 360*

      Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel. Rugged Steel “Angle” Construction with Steel Plate Ramp....

    Out of stock

  • Reel Stand Adaptor Only

    Reel Stand Adaptor Only

      Custom Adaptors for existing Combo Units for mounting a single compartment paralleling reel. Includes heavy duty drop-in bracket with fixed 2” dia. stub shaft and reel 2 1/8” locking collars....

    Out of stock

  • HD Reel Roller Platform – 480 DW HD*

    HD Reel Roller Platform – 480 DW HD*

      Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel.Rugged Steel “Angle” Construction with Steel Plate Ramp....

    Out of stock

  • HD Reel Roller Platform – RRP- HDRR5*

    HD Reel Roller Platform – RRP- HDRR5*

      Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel. Rugged Steel “Angle” Construction with Steel Plate Ramp....

    Out of stock

  • CTU/CPO

    CTU/CPO

      Traversing column style take-ups and payoffs are some of the most advanced on the market today and offer capacities to 80,000 pounds. These units offer unique benefits as true walk thru capabilities, overhead reel loading or loading from the front or rear of the unit....

    Out of stock

  • Reel Roller Platform PRR13

    Reel Roller Platform PRR13

      HD Powered Reel Rollers PRR13 has capacity of 13000lb unique custom design to fit into shipping containers and it is available for reel capacities to 20000lb....

    Out of stock

  • Powered Reel Trailer

    Powered Reel Trailer

      Reel Trailers comes with standard gasoline engine which has load capacity of 14000lbs with 12 volt electric start....

    Out of stock

  • Large Gantry Takeups and Payoffs

    Large Gantry Takeups and Payoffs

      Traversing Frame Take-Ups and Payoffs are some of the most advanced on the market today, now with capacities up to 100,000 pounds. ...

    Out of stock

  • Small Gantry Takeups and Payoffs

    Small Gantry Takeups and Payoffs

      Traversing Frame Take-Ups and Payoffs are some of the most advanced on the market today, now with capacities up to 100,000 pounds....

    Out of stock

  • HDHSTU & HDHSPO

    HDHSTU & HDHSPO

      Model HDHSTU & HDHSPO Series of take-ups and pay-offs were developed for higher take-up and pay-off speed applications. A robust and compact design allows for minimum floor space requirements with easy loading and unloading of reels with roll-thru capabilities and shaftless positioning reel loading operation....

    Out of stock

  • Small Cable Reel Racks - Accessory Kit 3*

    Small Cable Reel Racks - Accessory Kit 3*

      Small Cable Reel Racks - Accessory Kit 3 with product number CR4836120A, I4500, Axle348 and comes in respective quantity 1,3 and 4....

    Out of stock

  • Mini - Penthouse

    Mini - Penthouse

      The “Mini-Penthouse” is ideally suited for pulling material from reel racks, reel roller platforms or a pay-out cart. Also, ideal for use with an extrusion line when equipped with a dancer or tension control....

    Out of stock

  • Tip-Up Cart  (Portable Pay-Out Carts)

    Tip-Up Cart (Portable Pay-Out Carts)

      Reel Capacity: 48” dia. x 32” wide x 2,000 lbs. Portable pay-out stands have five (5) reel loading positions for various sized pay-out reels. The operator uses his/her body weight as leverage to lift the reel into position. Replaceable bolt on axle brackets. No more cutting and welding to replace worn brackets....

    Out of stock

  • RT-60  The Reel Thing

    RT-60 The Reel Thing

      Allows you to lift and flip your reel over from a rolling to a non-rolling position. The Reel Thing has been laboratory tested with ASME code stamped on each toggle bar making it safer to operate. It allows you even more lift with higher load ratings, and it offers you versatility & safety while transporting your reels and paying out product in the field. It is offered in a variety of sizes,...

    Out of stock

  • Heavy Duty Economy Coiler (HDEC)

    Heavy Duty Economy Coiler (HDEC)

      Coiler Options:3/8 C - Coiler 3.5” Wide X 8” I.D. X 14” O.D.3/12 C - Coiler 3.5” Wide X 12” I.D. X 21” O.D.3/16 C - Coiler 3.5” Wide X 16” I.D. X 27.5” O.D....

    Out of stock

  • Mobile Reel Rack Cart(REELRACK-61)

    Mobile Reel Rack Cart(REELRACK-61)

      Mobile Reel Rack Cart(REELRACK-61) : Reelpower Industrial “Mobile” Reel Rack Cart is manufactured with 3” Structural Steel to withstand many years of use. Components include upright frames, crossbeams, front-frame hanging brackets, solid steel reel axles, two fixed wheels, two rotating casters with brakes, push handles (for steering) and a galvanized-steel lower shelf pan for...

    Out of stock

  • Reel Lifter 3000LB Capacity

    Reel Lifter 3000LB Capacity

      Reelpower Industrial Heavy Duty TRD – “The Reel Deal” is a reel lifter, flipper, and pay-out tool for the field. It is a heavy Duty tool used to move reels in the yard or in the field, allowing you to flip reels from a rolling position onto their side, as well as lift the reel off the ground to pay-out from. The TRD helps you improve your overall production while reducing your...

    Out of stock

  • Reel Lifter 5000LB Capacity

    Reel Lifter 5000LB Capacity

      Reelpower Industrial Heavy Duty TRD – “The Reel Deal” is a reel lifter, flipper, and pay-out tool for the field. It is a heavy Duty tool used to move reels in the yard or in the field, allowing you to flip reels from a rolling position onto their side, as well as lift the reel off the ground to pay-out from. The TRD helps you improve your overall production while reducing your...

    Out of stock

  • HD Reel Roller Platform – RRP- HDRR5

    HD Reel Roller Platform – RRP- HDRR5

      Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel. Rugged Steel “Angle” Construction with Steel Plate Ramp....

    Out of stock

  • HD Reel Roller Platform – 480 DW HD

    HD Reel Roller Platform – 480 DW HD

      Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel.Rugged Steel “Angle” Construction with Steel Plate Ramp....

    Out of stock

  • Reel Roller Platform - RRP 600

    Reel Roller Platform - RRP 600

      Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel. Rugged Steel “Angle” Construction with Steel Plate Ramp....

    Out of stock

  • Reel Roller Platform – RRP - 300

    Reel Roller Platform – RRP - 300

      Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal.Side Rollers are Included. Low Base Design to Avoid Damaging of Cable  Inside Reel. Rugged Steel “Angle” Construction with Steel Plate Ramp....

    Out of stock

  • Small Cable Reel Racks - Accessory Kit 2

    Small Cable Reel Racks - Accessory Kit 2

      Small Cable Reel Racks - Accessory Kit 2 with product number CR4836096A, I4500, Axle348 and comes in respective quantity 1,3 and 3....

    Out of stock

  • Small Cable Reel Racks - Accessory Kit 3

    Small Cable Reel Racks - Accessory Kit 3

      Small Cable Reel Racks - Accessory Kit 3 with product number CR4836120A, I4500, Axle348 and comes in respective quantity 1,3 and 4....

    Out of stock

  • RT-20  The Reel Thing

    RT-20 The Reel Thing

      Allows you to lift and flip your reel over from a rolling to a non-rolling position. The Reel Thing has been laboratory tested with ASME code stamped on each toggle bar making it safer to operate. It allows you even more lift with higher load ratings, and it offers you versatility & safety while transporting your reels and paying out product in the field. It is offered in a variety of sizes,...

    Out of stock

  • RT-10 The Reel Thing

    RT-10 The Reel Thing

      Allows you to lift and flip your reel over from a rolling to a non-rolling position. The Reel Thing has been laboratory tested with ASME code stamped on each toggle bar making it safer to operate. It allows you even more lift with higher load ratings, and it offers you versatility & safety while transporting your reels and paying out product in the field. It is offered in a variety of sizes,...

    Out of stock

  • RT-40  The Reel Thing

    RT-40 The Reel Thing

      Allows you to lift and flip your reel over from a rolling to a non-rolling position. The Reel Thing has been laboratory tested with ASME code stamped on each toggle bar making it safer to operate. It allows you even more lift with higher load ratings, and it offers you versatility & safety while transporting your reels and paying out product in the field. It is offered in a variety of sizes,...

    Out of stock

  • Hose Reel P/N 14000-42*

    Hose Reel P/N 14000-42*

      P/N 14000-42 Our hose reel is designed for lighter weight material such as "tubing, hose and nylon cord or rope". The Manual hand crank is designed for easy winding and is accompanied with stand for mounting on any style of work station...

    Out of stock

  • Single Reel Loader & Transport Cradle P/N 0212-020 *

    Single Reel Loader & Transport Cradle P/N 0212-020 *

      Single Reel Loader & Transport Cradle P/N 0212-020 easily loads reel racking or auxiliary payout stands without damaging the wire....

    Out of stock

  • 4 Reel Stackable Cradle, P/N 0212-001 *

    4 Reel Stackable Cradle, P/N 0212-001 *

      4 Reel Stackable Cradle, p/n 0212-001 is custom designed to fit your application needs and it has cradles which are made to be moved by forklift. It has standard sizes for 5,000lb and 10,000lb reels....

    Out of stock

  • RJ2656  P/N 14988*

    RJ2656 P/N 14988*

      Screw Type Reel Jacks RJ2656 p/n 14988 are designed with rugged use in mind. Simply turn the handle and raise the saddle to the desired payoff height. Reelpower suggests that this item is purchased as a "Pair" unless customer already has one item and just needs a replacement to make a Pair. Please select quantity "2" to make a pair....

    Out of stock

  •  RJ4696 P/N 14990*

    RJ4696 P/N 14990*

      Screw Type Reel Jacks RJ4696 p/n 14990 are designed with rugged use in mind. Simply turn the handle and raise the saddle to the desired payoff height. Reelpower suggests that this item is purchased as a "Pair" unless customer already has one item and just needs a replacement to make a Pair. Please select quantity "2" to make a pair                 ...

    Out of stock

  • RJ5890 P/N 14985*

    RJ5890 P/N 14985*

      Screw Type Reel Jacks RJ5890 p/n 14985 are designed with rugged use in mind. Simply turn the handle and raise the saddle to the desired payoff height. Reelpower suggests that this item is purchased as a "Pair" unless customer already has one item and just needs a replacement to make a Pair. Please select quantity "2" to make a pair                 ...

    Out of stock

  • Brass Ejection nut for Reel Power RD5 and RDS10 P/N 2102-029*

    Brass Ejection nut for Reel Power RD5 and RDS10 P/N 2102-029*

      Brass ejection nut for Reelpower's RD 5 and RD10 P/N 2102-029...

    Out of stock

  • Brass Ejection nut for Reel Power RD5 and RDS10 P/N 2102-029

    Brass Ejection nut for Reel Power RD5 and RDS10 P/N 2102-029

      Brass ejection nut for Reelpower's RD 5 and RD10 P/N 2102-029...

    Out of stock

  • Mobile Reel Rack Cart (REELRACK-60)*

    Mobile Reel Rack Cart (REELRACK-60)*

      ReelPower Industrial “Mobile” Reel Rack Cart is manufactured with 3" Structural Steel to withstand many years of use. Components include upright frames, crossbeams, front-frame hanging brackets, solid steel reel axles, two fixed wheels, two rotating casters with brakes, push handles (for steering) and a galvanized-steel lower shelf pan for storage....

    Out of stock

  • Mobile Reel Rack Cart (REELRACK-59)*

    Mobile Reel Rack Cart (REELRACK-59)*

      ReelPower Industrial “Mobile” Reel Rack Cart is manufactured with 3" Structural Steel to withstand many years of use. Components include upright frames, crossbeams, front-frame hanging brackets, solid steel reel axles, two fixed wheels, two rotating casters with brakes, push handles (for steering) and a galvanized-steel lower shelf pan for storage....

    Out of stock

  • Reel Skate P/N 0202-200*

    Reel Skate P/N 0202-200*

      Reel Skate is designed to move fully loaded reels or spools on their flanges. The Reel Skate can handle reel flanges up to 5" wide and weights of 40,000 lbs P/N 0202-200...

    Out of stock

  • Mounted Cable Reel Stands

    Mounted Cable Reel Stands

      • Custom rail car container platform with three (3) HDCRS • Capacity for three reels, up to 72” diameter x 60” wide, 10,000 lbs. each • Reel stands are bolted to platorm and easily removable...

    Out of stock

  • Re-Reever RR-5

    Re-Reever RR-5

      Reelpower Industrial Re-Reeving machinery provides tension controlled pay-out and re-spooling for boom hoist and main lift line applications. The Re-Reeving series is available with customized torque capabilities and reel dimensions per customer required specs. Various self contained systems are available....

    Out of stock

  • B-12 Series

    B-12 Series

      For increased productivity, this machine allows the operator to load or unload finished Take-up reels while unit continues its re-spooling functions. The B-12 is perfect for distributors and flexible material processing centers. The B-12 series are custom designed and manufactured as needed....

    Out of stock

  • RD Series: Rim Drive

    RD Series: Rim Drive

      RD Series Rim Drive is smoother in acceleration and deceleration – “no popping”, reduces risk of damaging strands.Torque output is constant through all speed ranges....

    Out of stock

  • STU Series: Mobile Shaftless Take-Up Machinery

    STU Series: Mobile Shaftless Take-Up Machinery

      Reel Drive Take-Up Speed: 0-70 RPM Variable (Standard) Hand Held Pendant Controls Independent Movement Standard...

    Out of stock

  • HJ/K 3 SS / Galvanized

    HJ/K 3 SS / Galvanized

      Integral Hydraulic Push Button Cutter Manual Shaftless Feature Electronic Stop to Length Counter Paralleling Guide Box Safety Guards Collapsible Coiler (Steel or Aluminum) Powered Traverse Systems Measuring Meter Paralleling Reels...

    Out of stock

  • HJ 2 SS / Galvanized

    HJ 2 SS / Galvanized

      Integral Hydraulic Push Button Cutter Manual Shaftless Feature Electronic Stop to Length Counter Paralleling Guide Box Safety Guards Collapsible Coiler (Steel or Aluminum) Powered Traverse Systems Measuring Meter Paralleling Reels...

    Out of stock

  • Material Measuring Meter -1706

    Material Measuring Meter -1706

      The Reelpower Industrial model 1706 measurer is designed to measure heavy and large diameter cable such as wire rope and larger power cable. The pivot arms and springs keep the measuring roller tightly clamped against the cable to ensure accurate measurement. The heavy top and bottom rollers make it easy to pull material from the pay-off....

    Out of stock

  • Material Measuring Meter -1704

    Material Measuring Meter -1704

      Reelpower Industrial  Model 1704 measurer is designed to measure heavy and large diameter material such as Wire Rope and large diameter Cable. The pivot arms and springs keep the measuring roller tightly clamped against the cable to ensure accurate measurement. The heavy top and bottom rollers make it easy to pull material from reel racks. A fairlead for improved accuracy when measuring...

    Out of stock

  • Material Measuring Meter -1700SP

    Material Measuring Meter -1700SP

      The ReelPower Industrial  Model 1700 material length measurer offers increased accuracy, durability and operator convenience. The ROM 1700 has a measuring head that literally floats along the material being measured. That means less vibration between the material and the measurer - therefore greater accuracy. All counters feature large easy to read numerals available in Imperial or Metric. A...

    Out of stock

  • 1700-Material Measuring Meter

    1700-Material Measuring Meter

      The ReelPower Industrial 1700 series measurers are designed durable, easy to use, and highly accurate. Spring tension pinch roll design provides constant pressure on the material throughout the measuring process, providing accuracy within .5%....

    Out of stock

  • Cantilever Coil Rack

    Cantilever Coil Rack

      Reelpower Industrial Cantilever Coil Rack Package is great for putting up variable diameter and widths of coils for providing better efficiency with your valuable space and making it easier to find the right coil when needed....

    Out of stock

  • Elbow Racks

    Elbow Racks

      Reelpower Industrial Elbow Rack Package is great for storing variable sizes and lengths of your elbows of any form for providing better efficiency with your valuable space and making it easier to find the right elbow when needed....

    Out of stock

  • Conduit Rack

    Conduit Rack

      Reelpower Industrial Conduit Racking for storing bundles of conduit or singles in a ready-to-pull application which is quick and easy. No more pulling from bundles on the floor. Helps to make the most use of your space....

    Out of stock

  • Truck Mounted Re-Reeler

    Truck Mounted Re-Reeler

      Truck MounTed re-reeler allows dispensing of wire, cable and other flexible products in coils or on reels 36 inch diameter times 200 lbs. capacity! Provided with bearing mounts & adjustable drag brake....

    Out of stock