Search results for 'stub shaft'

  • BRT Series

    BRT Series

      BRT series is provided with a standard forklift tube base for ease of transporting to the site where it is needed. Bolt-down flanges and a removable 1 3/8” center stub shaft. Ideal for material pay-out from damaged reels....

    Out of stock

  • BRT2-01*

    BRT2-01*

      BRT series is provided with a standard forklift tube base for ease of transporting to the site where it is needed. Bolt-down flanges and a removable 1 3/8” center stub shaft. Ideal for material pay-out from damaged reels....

    Out of stock

  • BRT2-02 with ID pins*

    BRT2-02 with ID pins*

      BRT series is provided with a standard forklift tube base for ease of transporting to the site where it is needed. Bolt-down flanges and a removable 1 3/8” center stub shaft. Ideal for material pay-out from damaged reels....

    Out of stock

  • BRT5-001*

    BRT5-001*

      BRT series is provided with a standard forklift tube base for ease of transporting to the site where it is needed. Bolt-down flanges and a removable 1 3/8” center stub shaft. Ideal for material pay-out from damaged reels....

    Out of stock

  • BRT5-004 with ID pins*

    BRT5-004 with ID pins*

      BRT series is provided with a standard forklift tube base for ease of transporting to the site where it is needed. Bolt-down flanges and a removable 1 3/8” center stub shaft. Ideal for material pay-out from damaged reels....

    Out of stock

  • BRT5-005 with ID pins and 10" Mechanical Brake*

    BRT5-005 with ID pins and 10" Mechanical Brake*

      BRT series is provided with a standard forklift tube base for ease of transporting to the site where it is needed. Bolt-down flanges and a removable 1 3/8” center stub shaft. Ideal for material pay-out from damaged reels....

    Out of stock

  • BRT2-02 with ID pins

    BRT2-02 with ID pins

      BRT series is provided with a standard forklift tube base for ease of transporting to the site where it is needed. Bolt-down flanges and a removable 1 3/8” center stub shaft. Ideal for material pay-out from damaged reels....

    Out of stock

  • BRT5-005 with ID pins and 10" Mechanical Brake

    BRT5-005 with ID pins and 10" Mechanical Brake

      BRT series is provided with a standard forklift tube base for ease of transporting to the site where it is needed. Bolt-down flanges and a removable 1 3/8” center stub shaft. Ideal for material pay-out from damaged reels....

    Out of stock

  • BRT5-001

    BRT5-001

      BRT series is provided with a standard forklift tube base for ease of transporting to the site where it is needed. Bolt-down flanges and a removable 1 3/8” center stub shaft. Ideal for material pay-out from damaged reels....

    Out of stock

  • BRT2-01

    BRT2-01

      BRT series is provided with a standard forklift tube base for ease of transporting to the site where it is needed. Bolt-down flanges and a removable 1 3/8” center stub shaft. Ideal for material pay-out from damaged reels....

    Out of stock

  • BRT5-004 with ID pins

    BRT5-004 with ID pins

      BRT series is provided with a standard forklift tube base for ease of transporting to the site where it is needed. Bolt-down flanges and a removable 1 3/8” center stub shaft. Ideal for material pay-out from damaged reels....

    Out of stock

  • Heavy Duty Penthouse*

    Heavy Duty Penthouse*

      Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: 36” Diameter CT Coil Turntable with Adjustable ID Pins for Coil Payo and Center Post for Spool Payo...

    Out of stock

  • Binder BH5-S

    Binder BH5-S

      Binder BH5-S comes with custom sized to fit your needs and it allows shaft to ride on roller bearings....

    Out of stock

  • 3100M Measurer*

    3100M Measurer*

      Wire Measurer accommodates a wide variety of flexible materials from 1/64” (.4mm) to 7/8” (22mm) diameter. Accurate to within 1/2%. Quickly interchangeable guide tubes for small or larger materials....

    Out of stock

  • Heavy Duty Penthouse

    Heavy Duty Penthouse

      Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: 36” Diameter CT Coil Turntable with Adjustable ID Pins for Coil Payo and Center Post for Spool Payo...

    Out of stock

  • 3100M Measurer

    3100M Measurer

      Wire Measurer accommodates a wide variety of flexible materials from 1/64” (.4mm) to 7/8” (22mm) diameter. Accurate to within 1/2%. Quickly interchangeable guide tubes for small or larger materials....

    Out of stock

  • Powered Reel Trailer

    Powered Reel Trailer

      Reel Trailers comes with standard gasoline engine which has load capacity of 14000lbs with 12 volt electric start....

    Out of stock

  • LT Series: Length Trac 200 and Length Trac 400 Measurers

    LT Series: Length Trac 200 and Length Trac 400 Measurers

      Standard Features LT 200 Series 1/64" to 2" Diameter material LT 400 Series 1/8" to 4" Diameter material Adjustable entrance & exit guide rollers - both models Bi-directional shaft encoder Caterpuller Belt Drive System Polyurethane Steel Reinforced Belts Precision Components High Accuracy +/- .06%...

    Out of stock

  • Reel Jacks – Cable Drum Jacks

    Reel Jacks – Cable Drum Jacks

      "L" Series Cable Drum Jacks : These Hydraulic Cable Drum Jacks are indispensable for a properly equipped cable depot. Adjustable Shaft Saddle: Shaft saddles may be set for a number of vertical positions so that a minimum of foot pedal “jacking” is required....

    Out of stock

  • Collapsible Coilers - Standard & Custom Sizes

    Collapsible Coilers - Standard & Custom Sizes

      Available in either Aluminum or Steel, Collapsible Coilers are crafted to be used with our shafted and shaft-less machinery. They are easily connected and removed, saving many manhours of labor. these coilers are available in several standard size....

    Out of stock

  • WKT3 Coiling and Spooling Take Up

    WKT3 Coiling and Spooling Take Up

      The WKT Series Spooling and Coiling equipment is perfect for light to moderate duty applications.Take-ups are standard with a 1 3/8” O.D. shaft with bushings for 2”, 2 1/2” and 3” arbor holes.Utilization of a Hydraulic Jack allows reel to be raised and lowered with ease,eliminating the need to “tilt” and ergonomic strain (back-strain) problems....

    Out of stock

  • High Speed Spooler and Coiler

    High Speed Spooler and Coiler

      Standard Features Capacity 24” diameter x 12” wide x 150 LBs Dynamic Braking Feature V-Belt Drive Remote Safety Foot Switch Speed Control Potentiometer Illuminated on/off power switch 3/8 Inch Drive Pin 3/4 diameter Plug in Shaft standard with quick lock collar Right or left hand configuration available...

    Out of stock

  • MRTU: Cantilevered Shaft Reeling & Coiling Take-Up M/C

    MRTU: Cantilevered Shaft Reeling & Coiling Take-Up M/C

      Reelpowerwc MRTU Cantilevered Shaft Reeling and Coiling Take Up M/C is well known for its high utility and it comes with hassle free operations, durability and sturdy construction....

    Out of stock

  • FMT Series: Floor Mounted Shaftless Take-Ups

    FMT Series: Floor Mounted Shaftless Take-Ups

      Heavy duty floor mounted shaft less take-ups provide you with improved productivity,reducing processing time. Standard Speed Ranges 0-35 RPM or 0-70 RPM. Optional Dual Speed Range 0-35 and 0-70 RPM available. Independent Arm Movement standard. Optional Simultaneous Arm Movement available....

    Out of stock

  • FMP Series: Floor Mounted Shaftless Pay-Outs

    FMP Series: Floor Mounted Shaftless Pay-Outs

      Heavy duty floor mounted shaftless pay-outs provide you with increased productivity, reduced processing time and fast, easy supply reel change-outs....

    Out of stock

  • HJ 2 SS / Galvanized

    HJ 2 SS / Galvanized

      Integral Hydraulic Push Button Cutter Manual Shaftless Feature Electronic Stop to Length Counter Paralleling Guide Box Safety Guards Collapsible Coiler (Steel or Aluminum) Powered Traverse Systems Measuring Meter Paralleling Reels...

    Out of stock

  • HJ/K 3 SS / Galvanized

    HJ/K 3 SS / Galvanized

      Integral Hydraulic Push Button Cutter Manual Shaftless Feature Electronic Stop to Length Counter Paralleling Guide Box Safety Guards Collapsible Coiler (Steel or Aluminum) Powered Traverse Systems Measuring Meter Paralleling Reels...

    Out of stock

  • Bench Respoolers

    Bench Respoolers

      Bench respoolers are typically designed for spools smaller than 18" diameter and for materials less than 1/2" diameter....

    Out of stock

  • Insulation Test Respoolers

    Insulation Test Respoolers

      Insulation Testing and Respooling systems are a completely self-contained unit that was designed/developed for high speed in line production testing on PVC, teflon and other types of insulated wire with automatic respooling capabilities fro perdetermeined length packages....

    Out of stock

  • High Speed Shaftless

    High Speed Shaftless

      The High Speed Take-ups and Payoffs meet the demand for faster speed, wire and cable manufacturing and rewind. The heavy duty fixed pintle design allows processing speeds up to 5,580 FPM (1,700 MPM) on up to 2,000 lbs (900 kg) reels....

    Out of stock